Operating Manual
Original Operating Manual
19
As necessary
Replace worn sliders (2) by removing nut (5) from each cylinder (6). Pull the arms to
the side to remove (see chapter 3.1). Remove the greasing nipple (1) and the screws
(3, 3a). Replace the sliders (2). When installing the new sliders, make sure that the
axial stops (4) are correctly seated. Remount the screws (3, 3a) and the greasing
nipple (1). Push the arms into clamp body and reinstall nuts (5) of cylinders (6).
After installing or removing a cylinder (6), always check the clearance between the
cylinder mount and nut of the cylinder (8). Cylinders are installed with axial clearance
of 1.5 to 2 mm.
6.3.4 Rotator and flange
