8
ETL Model No.: CF995-1
3. Ceiling Fan Assembly
(continued)
3.10
Remove the Hanger Ball from the Downrod by
loosening the Phillips Head Set Screw in the Hanger
Ball until the Ball falls freely down the Downrod
(Figure 10).
Remove the Pin from the Downrod, then remove the
Hanger Ball.
Retain the Pin and Hanger Ball for reinstallation in
Step 3.17.
NOTE: Do not loosen the Screw that attaches the
Green Ground Wire to the Hanger Ball.
PHILLIPS HEAD SET SCREW (LOOSENED)
HANGER BALL
10" DOWNROD
PIN
GREEN GROUND WIRE
Figure 10
10" DOWNROD
TWO 80" MOTOR
WIRES (UNTWISTED)
Figure 11
3.11
Separate, untwist and unkink the Two 80” Motor Wires.
Route the Two 80” Black and White Motor Wires
through the 10” Downrod (Figure 11).
10" DOWNROD
MOTOR
COUPLER
LOOSEN SET
SCREWS (2)
Figure 12
3.12
Loosen the Two Phillips Head Set Screws in the Motor
Coupler for installation of the 10” Downrod (Figure 12).
Seat the 10” Downrod in the Motor Coupler (Figure 12).
Rotate and align the Two Downrod Clevis Pin
Holes with the Two Motor Coupler Clevis Pin Holes
(Figure 12).
