luminancebrands.com
Please contact 1-800-777-4440 for further assistance
ETL Model No.: CF995-1
7
3. Ceiling Fan Assembly
(continued)
3.7
Remove One #8 - 32 x 5/16” Pan Head Screw from the
Lower Light Fixture (retain for later use).
Loosen the other Three Screws to assemble the Lower
Light Cover to the Fixture (Figure 7).
LOWER LIGHT
COVER
#8 - 32 x 5/16" PAN
HEAD SCREW (3)
LOWER LIGHT FIXTURE
Figure 8
3.8
Position the Light Cover above the Fixture and carefully
tuck the Wires and Connectors into the space provided
between the Cover and Fixture as the Cover is lowered
onto the Fixture.
Align the Three Loosened Screw Heads into the Key
Hole Slots on the Cover.
Rotate the Cover Clockwise to engage the Screw
Heads.
Tighten the Screws and reinstall the previously removed
Screw to secure the Cover (Figure 8).
NOTE: Be careful not to pinch any wires or
connectors between the lower light cover and the
lower light fixture.
A spare #8 - 32 x 5/16” Pan Head Screw is in the
hardware bag, if needed.
STYROFOAM
PARTIALLY ASSEMBLED
CEILING FAN
Figure 9
3.9
Turn the Partially Assembled Ceiling Fan right side up
in preparation for final assembly. Carefully place the
Partially Assembled Ceiling Fan on the styrofoam being
careful not to bend the Ceiling Fan Blades (Figure 9).
LOWER LIGHT
FIXTURE
REMOVE ONE
#8 - 32 x 5/16"
PAN HEAD SCREW
LOOSEN THREE
#8 - 32 x 5/16" PAN
HEAD SCREWS
Figure 7
