luminancebrands.com
Please contact 1-800-777-4440 for further assistance
ETL Model No.: CF995-1
TO INSTALL BRACKET
TO WALL:
SLIDE THE COVER UP TO
EXPOSE THE SCREW
HOLES FOR INSTALLATION
COVER
WALL
BRACKET
TO INSTALL BRACKET
TO WALL:
INSTALL THE TWO SCREWS
SLIDE THE COVER DOWN
WALL
BRACKET
SCREW
HOLES (2)
COVER
SCREWS (2)
21
7. Remote Control Procedures
(continued)
7.8: Storage Bracket Installation
A Storage Bracket is provided for holding your Remote
Control when not in use. If you desire to use the
Bracket, install it on a wall that is away from excess
heat or humidity.
Slide the Wall Bracket Cover up to expose the screw
holes for installation (Figure 40).
Position the Bracket on the wall in desired location.
Install the two Screws (provided with bracket) into the
Wall Bracket and tighten to secure to Wall (Figure 40).
Slide the Wall Bracket Cover back down over the
screws.
Figure 40
