65
CONNECTING UP THE VIDEO/DVR
For details of how to connect your external recorder to the receiver refer to the connection diagram provided
at the end of this manual and the instructions for the external recorder.
In order to make a VCR recording (Record), the satellite receiver must be switched on or the timers must be
pre-programmed (see “EPG” “Recording (timer)” section).
For VCR/DVR playback you must have previously set the UFS 651 Scart socket to “VCR mode” (Scart
changeover), using the
button, so that the signal path is set up from the VCR or DVR/AUX Scart socket
to the TV Scart socket.
In this setting, the external recorder’s video signal is put through to the TV set during playback. If the
button is pressed once more, “Scart>TV” is selected. The TV set’s Scart socket is thereby given priority.
Pressing the
button again restores priority to the signal from the UFS 651 “Scart>Sat”.
The settings ”Scart>VCR” and ”Scart>TV” are shown in the display of the receiver.
RECORDING
PLAYBACK
