20
Universal:
No further input is required, since all necessary frequency ranges are covered by a universal LNB.
Wideband:
No further input is necessary, since all frequency ranges are set by the Wideband LNB.
Single:
If you are not using a Universal or a Wideband system, you must set the frequencies here. You can fi nd the
necessary information in the documentation supplied with your system.
Use the
buttons to select the line “LNB Low Frequency”). Use the
buttons or the keypad to
set the exact frequency for which your LNB was confi gured.
When you have completed all setting for the currently selected satellite, press the
button. If you have
selected more than one satellite, repeat the previous ”Satellite and Position” and “LNB Type” processes for
the number of satellites you selected.
When you have completed the settings for all the satellites, the following display appears:
FIRST INSTALLATION: One Cable
Use the
button to select the next menu item “New registration”, then press the
button.
The following display appears:
