Kathrein UFO 333/MX, Instructions Manual

Page: 26 / 72

12 / 14
Sub-menu for “CI”
*** UFO333MX ***
Slot
1
--
Slot unused
--
PMT oaa normal
Sub-menu for “CI”
*** UFO333MX ***
Slot
1
AlphaCrypt Light
PMT oaa normal
You can select between the CI module slot “1” display and slot “2” display by setting the slot number using the “<” or “>” key, and
by setting “1” or “2” using the “-” and “+” buttons. If a CI module is plugged into the respective slot (1 or 2), its name is displayed;
otherwise a message that the slot is empty is displayed.
Sub-menu for “CI”
*** UFO333MX ***
Slot 1
AlphaCrypt Light
PMT
oaa
normal
Sub-menu for “CI”
*** UFO333MX ***
Slot 1
AlphaCrypt Light
PMT oaa
normal
If more than one channel is decoded using a CAM (Conditional Access Module), there are different ways by which CAMs manage the list
of these channels. If the
fi rst parameter in the bottom line is selected using the “<” and “>” buttons, the “+” and “-” buttons can be used to
select between “Only Add Add”, “oaa” and “First More More Last” “fmml” .
The second parameter in the bottom line relates to the updating of the PMT if there have been changes to the management
information. When the “<” and “>” buttons have been selected, the “+” and “-” buttons can be used to select between “Update the
complete channel list”,
“normal” and “List update”, “optimised” . Whilst practically all CAMs support the “normal” setting, there are
some CAMs that do not permit the “optimised” setting.
Note: An inappropriate “normal” or “optimised” setting can cause loss of all encrypted channels; it may be necessary
to switch the module off and on again to recover from this.
Note: The selection of the channels to be decoded is performed in the Channel fi lter menu.
The “TP” transport stream processor is selected using the “<” and “>” buttons and the sub-menu is called up with the “Sub-menu”
button
.
The “Filter” channel fi lter is selected if necessary using the “<” and “>” buttons and is called up using the “Sub-menu” button .
Main Menu
E1 1236 MHz
TP
27.500 MS/s 3/4 QPSK
Outp. S21 306.00 MHz
8 MHz QAM64
“Transport stream processor” sub-menu
*** UFO333MX ***
Filter 62%/76%
IDs CI
Back
In addition, for the “1.13 Transport stream processor: Channel fi lter”, if the CI retro fi t kit is fi tted a selection facility appears in the top line
at the far right. This is for decoding the module slot provided (1 or 2), and offers the following selection options:
“-” = No decoding “1” = Decoding via CAM 1 “2” = Decoding via CAM 2
Note: Only channels (T, R or D) from the E2 input tuner can be decoded.