Kathrein UFO 333/MX, Instructions Manual

Page: 15 / 72

1 / 14
■
DVB-S/HDTV channel unit for installation in UFO ®
compact
base units or UFG 3xx, UFG 4xx expansion units
■
For processing two HDTV Sat or DVB Sat transponders in
a COFDM output signal
■
Permits the removal of individual channels from two 8PSK-
modulated DVB-S signals (or QPSK-modulated DVB-S
signals), the multiplexing of the two transport streams and
their conversion into one COFDM-modulated output signal
■
Two inputs A/B, settable via the central controller of up
to 8 Sat signals (e.g. for H/V switching and creating the
cable NIT for two polarities)
■
DiSEqC™ to control external DiSEqC™ multi-switches (one
can only use DiSEqC™ matrices with eight Sat-IF inputs (two
satellites))
■
All essential transmission parameters can be set using
the central controller
■
Output level can be set and switched off via the central
controller
■
Adjacent channel compatible
■
•
•
•
•
MPEG transport stream processor
To set a constant output data rate (stuf
fi ng) with PCR
correction
With channel
fi lter to remove individual TV and radio channels
(easy setting using the USW 30 and UFX 31x)
For NIT matching (cable NIT; additionally a UFX 31x is
required)
For CAT matching, e.g. to set the operator ID
■
Extendable using a UFZ 394 Common Interface retro fi t kit to
add two CA modules
■
COFDM modulator with 2K IFFT for QPSK, 16/64 QAM
(factory pre-set to 64 QAM)
UFO 333/MX 20610110
UFO
®
compact
signal processing system
DVB-S(2)-COFDM transmodulator
Features
■
MPEG transport stream processor and COFDM
modulator as FPGA solution
■
Software update possible via control interface
■
•
•
Permissible ambient temperature when used in:
base unit with fan (UFG 412): -20°C to +50°C
and extension unit without fan (UFG 3xx):
-20°C to +40°C
■
Required controller software version: from V9.40
■
Dimensions (W x H x D) in mm: 265 x 27 x 170
■
Packing unit/weight (pc./kg): 1 / 0.8
Technical Speci fi cation
¹ ) Settable in 1 MHz steps
2) Settable in 7 or 8 MHz channel plan, fi ne tuning in 250 kHz steps
3)
If both inputs A and B are connected, ensure that the input levels are about equal for each
4)
Depending on COFDM parameter Guard Interval, code rate and modulation
Output
(F connector socket)
Panel for
enclosed label
Socket for connecting
controller (Mini-DIN)
Connection for
power supply bus
Sat-IF input B
(F connector socket)
Sat-IF input A
(F connector socket)
Type
Order no.
Frequency range
(MHz)
Input level
3)
Input
Data rate
Output
data rate 4)
Modulation Error
Rate
Max. output
level
Setting range/
Output level
Current
consumption
Input
1)
950-2150
Output
2)
47-862
(dB μ V) (MS/s) (MBit/s) (dB) (dB μ V) (dB μ V) (V/mA)
UFO 333/MX
20610110
Ch Ch Ch
55-85
2-45 (S1)
2-30 (S2)
4.98-31.67
33.5 (< 400 MHz)
32 (> 400 MHz)
91 81-91
5 V/1200
12.5 V/750
31 V/7