Kathrein UFO 333/MX, Instructions Manual

Page: 20 / 72

6 / 14
Fine adjustments can be made to the output frequency in the output channel sub-menu in 250 kHz steps.
Press the “Sub-menu” button to activate the sub-menu; press the “Sub-menu” button again to deactivate it.
1.7 Selecting the output level
The output channel unit is selected using the “<” and “>” buttons.
Main Menu
E1 1236 MHz TP
27.500 MS/s 3/4 QPSK
Outp.
S21
306.00 MHz
8 MHz QAM64
“Output channel” sub-menu
*** UFO333MX ***
Frequency 306.00 MHz
Level
0
Output On
The output level of the output channel can be adjusted in 40 steps from a maximum level “0” to a minimum level of “-40” using the
output channel sub-menu .
Press the “Sub-menu” button to activate the sub-menu; press the “Sub-menu” button again to deactivate it.
The output level is selected using the “<” and “>” buttons and adjusted using the “+” and “-” buttons.
The output channel unit is selected using the “<” and “>” buttons.
1.8 Switching the output on/off
Main menu (output I switched off)
E1 1236 MHz TP
27.500 MS/s 3/4 QPSK
Outp.
* S21
306.00 MHz
8 MHz QAM64
“Output channel” sub-menu
*** UFO333MX ***
Frequency 306.00 MHz
Level 0
Output
Off
The output can be switched on and off using the output channel sub-menu .
The following settings are available: on or off
Press the “Sub-menu” button to activate the sub-menu; press the “Sub-menu” button again to deactivate it.
The output is selected using the “<” and “>” buttons and adjusted using the “+” and “-” buttons.
When the output is switched off an indicator “*” is shown in the main menu, on the left beside the output channel.
1.9 Selecting the output channel bandwidth
The output channel bandwidth is selected using the “<” and “>” buttons.
Main Menu
E1 1236 MHz TP
27.500 MS/s 3/4 QPSK
Outp. S21 306.00 MHz
8
MHz QAM64
Use the “+” or “-” keys to set the output channel bandwidth to the values 6 MHz, 7 MHz, or 8 MHz.