Installation manual Reader
13
Modifications, misprints and errors excepted
English
2.6.
Further reference material
In order to configure the reader correctly and adapt it to the respective application, detailed knowledge of the
EPCGlobal standards of GS1 is necessary ((E)). This standard describes the principle of operation of the interface
between the tag and reader.
The parameters available for the configuration of the reader is available as described in the “configuration manual
Reader” ((B))
The reader is controlled via the Kathrein-Reader protocoll (KBRP). The document “communication protocol” ((A)) in the
current version contains a detailed description of the protocol
Note
The versions of the documents must match the software version of the reader. The CD supplied contains the current
documents for the reader firmware supplied.
2.7.
Scope of supply
The package includes a CD next to each reader with a parameter, and test software (Reader Start), programming
examples, DLL and operating
((E))
EPCTM Radio-Frequency Identity Protocols Class-1 Generation-2 UHF RFID in version V1.2.0 :
www.epcglobalinc.org
„communication protocol“
((A))
for software developers
„configurational manual reader“
((B))
for commissioning
„installation manual reader“
((C))
Setup and installation
"installation manual antenna“
((D))
Setup and installation
„EPCGlobal standard“
((E))
for software developers
„Putty is SSH and Telnet-Client“
((F))
for software developers
