Installation manual Reader
39
Modifications, misprints and errors excepted
English
5. Software
Figure: Setting the warnings
Figure: Updating the firmware
Figure: Setting the date and time
Under the item
Warnungen
(Warnings), the confirmation queries for the actions Describe, Block or Deactivate the
tags in the field are activated or deactivated.
Note
Changing the memory content of the tags can render them unusable.
If it is desired to recreate the original layout of the program in respect of window size and sequence
of tabs, this can be achieved by means of the
Reset layout
menu item.
The Firmware Update item permits the update of the reader firmware. The window that opens shows the version
currently mounted in the reader. After selection of a firmware file, this version is shown in the next line. Pressing the
Update
button starts the procedure. The progress is shown in the
Update progress
line in a bar. After a successful
update the reader must be restarted, either by pressing the
Restart
button or by switching the power supply off and on
again.
The reader has an integral clock, which can deliver the time stamp for a tag operation. This clock is set using the
Date and
time settings
in the menu. When this menu item is opened, it automatically reads the current date and time from the reader
and compares this with the date and time from the host computer. The date and time of the host computer can now be
loaded to the reader by pressing the
Set system date and time on Reader
button. There is also the facility to set the reader
date and time manually and load it to the reader. This is done by entering the desired date and time on the reader side and
pressing the S
et adjusted system date and time on Reader
button. The status line indicates which action was just executed
and whether the action was successful.
