background image

Installation manual Reader 

3

Modifications, misprints and errors excepted

English

Foreword and general information

The reproduction or distribution of this document or extracts from it in whatever form and by whatever means (electronic or mechanical) 

for whatever purpose is permitted only with the prior written permission of Kathrein.

Kathrein accepts no liability for omissions or inaccuracies in this document or in relation to the provision or use of the information 

contained in this document. Kathrein reserves the right to change the products described in this document and does not accept any 

liability in relation to the application or usage of the products described in this manual.

This  document  and  the  information  contained  in  it  are  proprietary  information  of  Kathrein  and  should  be  treated  as  confidential. 

Kathrein provides this document to its customers in connection with contacts of sale for the products described therein. If the person 

in possession of this document, being a legal or natural person, is not a contractual sales partner of Kathrein, or Kathrein has not 

intended him by other means as the recipient of the document and the information contained therein, the person in possession is hereby  

informed that the use of this document is unlawful and a violation of the rights of Kathrein.

Copyright notice

The information in this manual was correct at the time of editorial deadline.

We reserve the right however to make changes at any time and without prior notice.

This document was prepared for specialist personal who install, configure and place in operation the reader.

Scope

The information contained in this manual is intended for the support of the development process and as development guidance 

for the customer. In addition this manual offers supporting information about the standards to be applied at the place of installation  

and the relevant safety standards for installation and configuration of the Kathrein reader.

General information

This  manual  contains  information  on  the  installation,  configuration,  operation  and  maintenance  of  the  reader.  In  addition  it  gives 

 

detailed technical data in order better to familiarise the user with the features of the reader. 

In order to ensure a long working life and fault-free operation, this manual should therefore be read carefully and all the instructions  

and information contained in it should be complied with.

Warranty

Switching on the AC or DC power supply prior to connecting the LAN cable is considered incorrect installation. Any functional defect 

arising as a result is excluded from the warranty/guarantee. Before installing or servicing the reader, the person concerned must 

have read the manual and understood its contents. Kathrein accepts no liability if the customer fails to implement the precautions  

listed here. In such cases, any claims under the warranty/guarantee are void. 

Disposal instruction

Electronic equipment is not classed as household waste and must be disposed of properly in accordance with 

Directive 2002/96/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on used  

electrical and electronic equipment.

At the end of its service life, take this device for disposal at a designated public collection point.

Used batteries are special waste!

Do not put used batteries into your domestic waste; instead take them to a collection point for used batteries!

Further reading on this manual is as ((A)) in section 2.2. further reading or 7th list of references listed.

Summary of Contents for RRU4-RS4-E6









































Reviews: