29 of 56
7
Dismantling for Servicing
If repairs to the system or individual components are necessary, contact your specialist dealer or our service centre (see
the address below).
CAUTION
Risk of injuries when opening the turntable!
►
Do not open the turntable yourself.
NOTICE
Risk of material damage when cutting the cables!
►
Do not cut the cables.
►
At the cable junction provided, disconnect the cables projecting from the turntable from the cables laid
within the interior of the vehicle (unplug the plug).
7.1
Dismantling the Turntable
1. Move the turntable to the park position.
Tip
The cables laid within the vehicle can remain there.
2. Unscrew the six M6 screws which secure the turntable to the mounting plate.
3. Place two wooden supports on the vehicle roof for protection.
4. Place the turntable on the prepared wooden supports.
5. Use the original packaging to ship the turntable.
6. Seal the opening in the vehicle roof appropriately to protect against the ingress of moisture.
7. If an HDZ 100 roof duct has been fitted and the equipment is removed, seal the cable glands that are no longer used
with the integral plugs.
➯
The casing is watertight again.
7.2
Address of the Service Centre
Main factory repair centre
Regional repair centre
CSS Caravan-Sat-Service GmbH
Bahnhofstr. 110
83224 Grassau, Germany
Phone: 08641 6998427
Fax: 08641 6998429
E-mail:
KATHREIN Sachsen GmbH
Lindenstraße 3
09241 Mühlau, Germany
Phone: 03722 6073-31
Fax: 03722 6073-18
E-mail:
