26 of 56
Installation and Connection
1. Before commencing the work, isolate the on-board power supply. To do so, move the master switch to the off posi-
tion or disconnect the positive pole of the on-board power supply battery.
2. Connect the 12 V power supply cable to the
12 V =/2,5 A
socket on the CAP converter.
3. Connect the other end of the 12 V power supply cable to a 12 V socket in your motor home or caravan.
Tip
Only for motor homes
The third, green connecting cable, marked
IGNITION
allows you to connect to a circuit in the vehicle that is
activated when the ignition key is turned and then carries a continuous 12 V supply. This type of connec-
tion ensures that when the engine is started, the antenna is automatically lowered into the park position
(the CAP converter does not need to be turned on).
Note that the antenna can be lowered only if the power supply is present in addition to the ignition signal!
4. Check the connections before you reconnect to the on-board power supply.
For more information on commissioning and additional operator functions, see the operating instructions in this manual.
