40 of 56
DEKAsyl MS Safety Data Sheet
Page 3/7
Safety data sheet
according to 1907/2006/EC, Article 31
Printing date 29.05.2015
Revision: 29.05.2015
Version number 13
Trade name: Dekasyl MS-5
(Contd. of page 2)
40.1.5
See Section 13 for disposal information.
SECTION 7: Handling and storage
·
7.1 Precautions for safe handling
No special measures required.
Use only in well ventilated areas.
·
Information about fire - and explosion protection:
No special measures required.
·
7.2 Conditions for safe storage, including any incompatibilities
·
Storage:
·
Requirements to be met by storerooms and receptacles:
No special requirements.
·
Information about storage in one common storage facility:
Not required.
·
Further information about storage conditions:
None.
·
7.3 Specific end use(s)
No further relevant information available.
SECTION 8: Exposure controls/personal protection
·
Additional information about design of technical facilities:
No further data; see item 7.
·
8.1 Control parameters
·
Ingredients with limit values that require monitoring at the workplace:
The product does not contain any relevant quantities of materials with critical values that have to be
monitored at the workplace.
·
CAS No. Designation of material % Type Value Unit
Not required.
·
Additional information:
The lists valid during the making were used as basis.
·
8.2 Exposure controls
·
Personal protective equipment:
·
General protective and hygienic measures:
The usual precautionary measures are to be adhered to when handling chemicals.
·
Respiratory protection:
Not required.
·
Protection of hands:
Protective gloves and protective skin cream
·
Material of gloves
PVC or PE gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality
and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the
resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the
application.
Recommended thickness of the material:
≥
0,12 mm
·
Penetration time of glove material
> 480 min.
The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be
observed.
·
Eye protection:
Goggles recommended during refilling
SECTION 9: Physical and chemical properties
·
9.1 Information on basic physical and chemical properties
·
General Information
·
Appearance:
Form:
Pasty
Colour:
According to product specification
·
Odour:
Characteristic
·
Odour threshold:
Not determined.
(Contd. on page 4)
GB
