12
936.2332
/E
/0905
/1
2.1
6
e
Main menu
Submenu language
12. Settings on system level
Utilisation of the control bus demultiplexer UFX 312 (Order No. 20610040) is required for the settings on
system level.
Access to the central control unit is possible with the keys (<< >>). The procedure is the same as the one used
for setting channel units. If the central unit is addressed, the yellow LED will be lit.
The (
+
) and (
–
) keys allow for selecting between the following functions
●
Set language
German, English, French
●
Version number
Display of bootloader version, Control
●
Cable NIT
ON/OFF, build-up, network name, network ID
The desired function is activated with the key.
Parameters in the submenu are selected with the (< >) keys. Values are changed with the keys (
+
) and (
–
).
In order to achieve faultless operation with the highest probability, we calculate a suggested bandwidth setting, which serves as
a setting guide. This value is made topical with the aid of a tow pointer as long as the submenu shows the output bandwidth.
Suggestion : measured max. bandwidth x 1.25.
Procedure :
The suggestion should be observed for a total of approximately 2 minutes.
The bandwidth then set should be equal to or bigger than the bandwidth suggested.
Setting the language
* * * *
System
* * * *
Language
setting
Choice
with
+ / -
* * * *
Language
* * * *
German
< Return:
Submenu >
Main menu
Submenu version numbers
Selecting the version numbers
Main menu
Submenu cable NIT
Setting for cable NIT
* * * *
System
* * * *
Version number
Selection
with
+ / –
*
Version number
*
Bootloader
V2.00
Control
V7.00
< Return:
Submenu >
* * * *
System
* * * *
Cabel NIT
Selection
with
+ / –
* * * *
Cable NIT
* * * *
NIT
ON
Build-up
Network
Name
ID
< Return:
Submenu >