CARTRIDGE INSTALLATION
The MyBottle ViruPur microbial purification cartridge is for use with MyBottle
water purification system. Each replaceable ViruPur Replacement Cartridge
will treat up to 100 liters (26 gallons) of water.
CHECKING THE LIFESPAN OF THE MYBOTTLE VIRUPUR
MICROBIAL PURIFICATION CARTRIDGE
The MyBottle comes with a cartridge life counter. This integrated mechanism
inside the bottle cap indicates when to replace your ViruPur Cartridge.
a.
Before each filling remove the cartridge/bottle cap from the bottle.
b.
Remove the ViruPur Cartridge with the Postfilter from the cap and lay
aside.
c.
Carefully rotate the life counter in a clockwise direction until it snaps into
the next position. This is best done holding the bottle cap in both hands.
d.
When the life counter is back at the starting point it is time to replace the
cartridge.
e.
Only use the included straw instead of purification cartridge if water
source has been treated and is safe for drinking (like most tap water).
3. Flush system (IMPORTANT!)
Before first use, flush system to remove harmless carbon dust from the
Postfilter. Fill bottle with water. Install bottle cap with assembled cartridge
on bottle and tighten. Squeeze bottle tightly with both hands until water
runs clear. The first squirt of water will be black from the carbon dust. This
is normal when flushing.
NORMAL OPERATION
1.
Fill the bottle with water to the fill line
(Figure 2). Remember, the clearer the
water, the longer the integrated Prefilter
and Postfilter will last.
2.
Insert cartridge/bottle cap into bottle.
Turn bottle cap clockwise until tight.
3.
Flip open mouth piece. Note: The mouth
piece has two positions (Figure 3).
4.
Hold the bottle upright when drinking.
Squeeze and sip using continuous pressure.
5.
Press the mouth piece down after use to close the bottle.
6.
Do not remove the mouth piece from its fixture.
NOTE: Before each use, flush and discard small amount of water to
remove stale taste. Refill bottle.
Figure 2
Open
Closed
Opening for straw
Cartridge life counter
“START” position
Figure 4
Figure 3
EN
Fill line
5=B%HWULHEVDQOHLWXQJB9LUX3XULQGG
