Katadyn EK-24, Instruction Manual

Page: 22 / 43

Katadyn Page 21
11.6 Water inlet and outlet / drainage
ATTENTION!
Pipes and pipe fittings must be done according to the local guidelines and by
qualified personnel.
The water to be treated enters the EK through the inlet located at the bottom of the activator where the
Flow Switch is situated. If the “part-stream” principle is applied, the pipes for water inlet and outlet lead to
the main pipe. If the complete water volume is to flow through the Electro-Katadyn unit (= smaller flow
rates), the unit is inserted into the main pipe.
The drain port at the bottom of the activator should be connected to a drain pipe. This will allow the water
in the activator body to be drained out to allow maintenance work to be carried out on the EK.
Inlet water valve EK-4 Inlet water valve EK-24