1. Install Filter Protector (pre-assembled)
The Filter Protector is a cleanable screen that covers the Ultra Flow Filter
TM
Cartridge. A frequent cleaning is not required; however, using the Filter
Protector will extend the life of your cartridge.
It may be used continually or when source water contains suspended
particulates or dirt.
Step 1: Wrap protector sheet around cartridge (there will be approximately a
5 cm overlap) and hold in place.
Step 2: Slip the flexible netting over the cartridge. Adjust filter protector sheet
and netting so they are positioned evenly. (Figure 1)
Filter
Step 1
Step 2
(Figure 1)
Protective Screen
Netting