the taste of the water and reduces chemicals.
(Note: the flow rate will be slower than the Gravity Camp 6L and Base Camp Pro
10L filter due to the carbon core - approximately 0.5 l per minute)
Install Filter Cartridge
Press cartridge into external threaded opening of bag until the o-ring can no
longer be seen. This may require some effort. A small amount of food grade,
water resistant multipurpose grease for rubber-elastic seals and plastic bearings
(e. g. BERUSIL FO 26) or Katadyn silicon grease on the cartridge o-ring will aid
the insertion.
Do not grasp the cartridge around the pleated surface, since it may damage the
filter. Attach threaded cap (sold separately) to the external threads of the bag and
turn clockwise to hold the cartridge firmly in place. Attach output hose to cartridge
output barb (Figure 6).
KATADYN SIPHON CERAMIC MICROFILTER COMPATIBLE
The Katadyn Siphon Ceramic Microfilter (sold separately) is also compatible
with the Gravity Camp 6L or the Base Camp Pro 10L. Some customers prefer
the benefits of our long lasting, cleanable ceramic filters. They are excellent for
extremely dirty/silty water, although the flow rate of the Siphon Ceramic Filter is
slower than the standard pleated filter in the Gravity Camp 6L and Base Camp
Pro10L (approximately 0.5 l per hour).
Installing Siphon Ceramic Filter Cartridge
Screw the cap clockwise on the external threads of the bag as far as it will go.
Screw cartridge clockwise inside cap as far as it will go. Connect the output hose
to cap by pushing the connector at hose into the cap connector until it clicks in
place (Figure 7).
8014644
8014782
(Figure 6)