NORMAL OPERATION
1.
Ensure fi lter cartridge is properly tightened into the bag (per Product Set Up
instructions).
2. Remove output hose from the cap by disconnecting the quick connection
system. As long as the output hose is not attached to cap, the integrated quick
connection valve closes the quick connect valve, turning off the water fl ow.
Once output hose is reconnected, the quick connection valve will be opened
and water will begin fl owing.
3. Fill bag with water using a separate container. If a separate container is
not available, open bag and fi ll directly from water source. Do not allow
contaminated water to contact outlet connection or end of outlet hose.
IMPORTANT
(to avoid the risk of illness): Dry off outside of bag and outlet hose
to avoid untreated water running down bag/hose into your water container.
WARNING
To minimize the risk of illness, dry off outside of bag and outlet hose to prevent
untreated water from running down bag/hose and into your water container.
Improper use of fi lter can lead to contamination and illness. To minimize risk,
when fi ltering water, do not splash dirty or unfi ltered water into clean container
and follow all of the instructions in this manual.
4. Close bag by folding ends. (Figure 3) Dry bag and outlet connector with
clean cloth.
(Figure 3)
