ADSL ROUTER
USER MANUAL
13
2.
On the Rear Panel of the ADSL router you will find a small hole with the word "
reset
"
written below it. It's just big enough for a ball-point tip. Insert a ball-point tip into this little
hole (actually it's a reset switch) and keep the ball-point tip in there.
3.
Switch the router
ON
, and hold the ball-point tip in the little hole.
You can release the ball-point after about 10 seconds. You have then completed the full-reset.
Your ADSL router will now have its factory default settings. IP address will be 192.168.1.1 and
the subnet mask will be 255.255.255.0.
Now you can reboot your PC again.
