ADSL ROUTER
USER MANUAL
12
in
Encapsulation Mode
and then click
“
Next
”
.
3.
Enter user name and password provided by operator, then click
“
Next
”
.
4. Click
“
Next
”
in the following page.
5. Click
the
“
Save
”
button in the summarize page to save the settings.
6. Select
from
“
Management Save/Reboot
”
and then click the
“
Reboot
”
button to restart the
ROUTER.
7. If factory default settings of ROUTER includes VPI/VCI provided by operator, please
select from
“
Advanced Setup WAN
”
and find corresponding VPI/VCI value in the page
and click the
“
Edit
”
button. Then follow the steps as specified above.
8.
After routing settings are finished, if you want to enable DHCP service, then please set IP
address of PC network card to obtain an IP address automatically. If you don’t want to
enable DHCP service, then you need to assign an IP address for your PC network card and
set DNS address to the address provided by operator (If operator doesn’t provide the DNS
address, then the address is set to 192.168.1.1 that is the address of ROUTER).
Note: If you want to cancel all modification that you do on the router, please select from
“Management Setting
Restore Default Settings” to restore factory default settings.
5.5
Reset
Router
For convenience: shutdown your computer first.
1.
Switch the ADSL router
OFF
.
