6
Step 5
After attaching unit to the float according to fountain/aerator instructions, push clips into recesses on float until an audible click is heard
and fixture is secure.
Ensure clip is fully
seated on float
Step 6
Repeat for remaining fixtures, spacing evenly around the float. Adjust angle of lights using thumb nuts if desired, being sure that the
same angle is used for all fixtures. Cable ties can be used to attach fixture cords to float to decrease play and ensure protection. Cable
tie light kit power cord to float opposite the fountain power cord for balance and to prevent damage from fountain. Upon installation of
the assembled unit, connect light kit to field installed GFCI protected outlet and timer.
Secure light kit power
cord to float using
supplied cable ties
Summary of Contents for LED3C11
Page 12: ...12 Replacement Parts ...