4
Mounting Instructions
Step 1
Attach the bracket
(H)
to the light fixture
(C)
by fitting the head of the 10-
32 x 1/2’’
hex screw
(I)
into the tabs on each side of
the fixture. Place one bracket O-ring
(G),
one #10 lock washer
(F)
, and one thumb nut
(E)
on each #10 screw outside the
bracket. Tighten the thumb screws on each side hand tight only. Repeat this step for all fixtures.
Step 2 (Optional)
If you desire to change to one of the color choices instead of the standard soft white light, unpeel the protective backing from both
sides of the colored lens
(B)
of your choice. Place the lens inside the lens cap
(A)
making sure the 3 flaps are holding the lens in
place. Repeat this step for all lens caps. Continue to Step 3.
No Gap
Flaps behind lens
Summary of Contents for LED3C11
Page 12: ...12 Replacement Parts ...