9
Note:
The LED light fixtures are sealed and do not require any physical maintenance other than cleaning. If a fixture fails to operate it
can be removed and the included sealing cap installed onto the waterproof connector of the power cord. This will allow you to continue
to operate your light kit with two fixtures while a replacement fixture is procured. Only perform this removal/replacement with all
equipment disconnected from the power source.
Any required repairs must be performed by Kasco Marine. Any alterations or changes made to Kasco units by an unauthorized source
will void the warranty. This includes tampering with the unit, power cord, and/or control box.
A physical
Kasco Repair Form
must be included with any equipment sent to Kasco or an Authorized Repair Center. This form can be
found under the Product Support section of kascomarine.com. If no Repair Form is available, include your name and physical address
for return delivery of the repaired Light Kit and a daytime phone number and/or e-mail address for correspondence regarding the
warranty claim.
Note:
Visually inspect the power cord for any cuts, rodent chews, etc. to determine if it should be included in the repair shipment. The
cord may be needed by the shop to diagnose the failure.
Once warranty coverage has been established, the equipment may be sent to any Kasco Authorized Repair Center or to Kasco at:
Kasco Marine, Inc.
800 Deere Rd.
Prescott, WI 54021
Attn: Repairs
Non-Warranty Repairs:
Most failed equipment can be repaired at substantially lower costs than replacement with new. If your light kit
requires repair and is no longer covered under warranty, please contact Kasco Marine or your local distributor for available options.
Please ship according to the instructions above.
•
Kasco Marine does estimates on repairs at the request of the customer. The request for estimate should be included in the
letter that accompanies the returned unit and must include a daytime phone number and/or e-mail address. We will contact
the customer with a total after the unit has been evaluated, but before the work is performed.
•
All estimates that are rejected for repair will be destroyed unless otherwise directed by the customer. Rejected equipment can
be returned at
the customer’s expense for shipping and handling charges.
Billing:
All non-warranty repairs will be returned and billed to the customer unless otherwise directed. Kasco Marine accepts Visa and
MasterCard credit card payments. Kasco Marine will call for cr
edit card information upon completion of the estimate at the customer’s
request.
Please see the Product Support section of kascomarine.com for more information about warranty and repairs. Contact Kasco Marine at
715-262-4488 or [email protected] for additional information and your closest Authorized Repair Center.
Repair
Summary of Contents for LED3C11
Page 12: ...12 Replacement Parts ...