EVFX & 2400EJF FOUNTAIN PARTS INCLUDED (F2400EVFX,
F3400EVFX, & F2400EJF)
A. EV or EJ Aerating Fountain (Unit with cord or
stub cord) (1)
B. Float (with two 50’ mooring ropes attached) (1)
A. 1/4-20 x 3 1/4” Phillips Pan Head Screw (4)
B. 1/4” (3/4” outer diameter) Flat Washer (4)
C. 3/8” Flat Washer (4)
D. 3/8”-16 Nylon Lock Nut (2)
E. 3/8”-16 x 1-3/8” Hex Head Bolt (2)
F. Bottom Screen Clips (2)
G. Nylon Cable Tie
H. Bottom Screen
I. Interchangeable nozzles for 2400EJF only
(shown on page 7)
EVFX & 2400EJF FOUNTAIN TOOLS & SUPPLIES
NEEDED
A. Anchors or stakes for installing unit (2)
B. # 2 Phillips head screw driver
C. 240V Electrical Supply near pond on a post
D. Two 30cm pieces of 2.54cm galvanized pipe for weighting ropes (optional)
E. 9/16” (14mm) Socket and Ratchet
F. 9/16” Wrench
6
EVFX MODEL FOUNTAIN PATTERN SIZES
NOTE:
Pattern sizes listed are approximate. Variations in voltage caused by regional electrical differences or
voltage drop due to long power cords may result in reduced pattern sizes.
Model
Voltage
Pattern Height Pattern Diameter Running Amps
F2400EVFX
240V
1.15m
4.3m
2.2
F3400EVFX
240V
1.7m
6.1m
3.6
F2400EVFX
F3400EVFX
Item D
Included
with
2400EJF