8400EJF and 3.1EJF NOZZLE OPTIONS & PATTERN SIZES
NOTE:
Pattern sizes listed are approximate. Variations in voltage caused by regional electrical differences or voltage drop
due to long power cords may result in reduced pattern sizes.
•
The Linden, Willow, and Juniper nozzles use the 3/8” x 4” bolt.
•
The Redwood nozzle must have the Y Insert installed prior to nozzle placement.
•
The Spruce nozzle must have the Insert removed prior to nozzle placement.
•
The Birch display does not require a nozzle.
•
The Sequoia nozzle uses the 2.5” bolt and only comes with the 3.1EJF.
11
The Redwood
nozzle uses the 3
self tapping screws
to attach over the
pump housing and
the
Y Insert must
be installed
.
REDWOOD
Model
HP
Height
Width
8400EJF
2
5.5 m
1.5 m
3.1EJF
3
6.1 m
0.9 m
The Linden
nozzle (marked
L inside one of
the fins) uses the
3/8” x 4” bolt.
LINDEN
Model
HP Height Width
8400EJF 2 4.7 10.4
3.1EJF
3
4.1
9.8
The Willow
nozzle (marked
W on the
inside of the
cone) uses the
3/8” x 4” bolt.
WILLOW
Model
HP
Height
Width
8400EJF 2
3.4 10.4
3.1EJF 3 3.6
8.2
The Juniper
nozzle (marked
with J on in
inside of the
nozzle cone)
uses the 3/8” x
4” bolt.
JUNIPER
Model
HP
Height
Width
8400EJF 2
1.8 13.4
3.1EJF 3 2.7
12.2
The Spruce
nozzle uses the
three self tapping
screws to attach
over the pump
housing and the
Y
Insert must be
removed.
SPRUCE
Model
HP
Height
Width
8400EJF 2
5.5
3
3.1EJF 3
5.8 2.1
The Birch display does not use a nozzle or bolt.
It is the fountain unit running without any
nozzle and allows for the best flow rate and
oxygen transfer!
BIRCH
Model
HP
Height
Width
8400EJF 2
3.5 1.8
3.1EJF 3
3.0 4.0
SEQUOIA
The Sequoia nozzle
(marked S on the inside
of the cone) uses the 3/8”
x 2.5” bolt.
3.1EJF ONLY
Model
HP
Height
Width
3.1EJF 3 4.6 3.0