Kasco Aeration 3400JF, Owner'S Manual, Page: 4 / 24

4
Set of 5 Interchangeable Nozzles (5)
1. 3/8” x 2.25” bolt (1)
2. 3/8” x 4” bolt (1)
3. Linden Nozzle (1)
4. Sequoia Nozzle (1)
5. Juniper Nozzle (1)
6. Willow Nozzle (1)
7. Cypress Nozzle (1)
8. Collar for Cypress Nozzle (1)
Also Included:
Mesh screen (1) with cable ties (10) •
Mooring Rope Pipe Weights (2) •
Cord in separate box (1) (depending on size of •
cord)
Control Box (C-25 for 120V units in Float box
•
or C-85 for 240V units in separate box) (1) (Not
Pictured)
TOOLS & SUPPLIES NEEDED
Anchors or stakes for installing unit (2) •
# 2 Phillips head screw driver •
120V or 240V Electrical Supply near pond on a •
post with room for mounting the C-25 or C-85
Two 12” pieces of 1” galvanized pipe or weighted
•
tubing for weighting ropes (optional)
#10 x 1” long or longer screw(s) for mounting the
•
C-25 (3) or C-85 (4)
9/16” Socket and Ratchet
•
9/16” Wrench •
3400JF, 3400HJF Assembly
STEP ONE
Make sure you have all the parts needed. If any short-
ages are found, contact your Kasco representative
immediately.
3400JF, 3400HJF Parts Included
3400JF Aerating Fountain (Unit with cord or unit 1.
with Disconnect) (1)
Float (with two 50’ mooring ropes attached) (1)
2.
1/4-20 x 3 1/4” Phillips Pan Head Screw (4) 3.
1/4” split washers (4) 4.
1/4” (3/4” outer diameter) Flat Washer (4) 5.
3/8”-16 x 1-3/4” Hex Head Bolt (2) 6.
3/8” Flat Washer (4) 7.
Cushions for Legs (4) 8.
Bottom Screen cushions (3) 9.
Bottom Screen (1) 10.
Bottom Screen Clips (2) 11.
3/8”-16 Nylon Lock Nut (2) 12.
1
2
3
4
5
6
7
8
9
10
11
12
•