Karomat 66611, Instruction Manual

Page: 21 / 36

19
4. Press the trigger of the gun to depressurize the system.
5. Disconnect the garden hose from the pressure washer.
6. Wipe all surfaces of the unit with a damp clean cloth.
7. Engage the gun safety lock.
CAUTION: ALWAYS turn off the unit’s motor BEFORE turning off the unit’s
water supply. Serious damage could occur to the motor if the unit is run
without water.
CAUTION:
NEVER disconnect the high-pressure discharge hose from the
machine while the system is still pressurized. To depressurize the unit, turn off
the motor, turn off the water supply and squeeze the trigger 2-3 times.
ADJUSTABLE SPRAY NOZZLE
Release the gun first, and then adjust the nozzle. Water may be sprayed out
from the spray nozzle either linearly (fig.1) or in fan shapes (fig.2).
Fig 1 Fig 2 Fig 3 Fig 4
WATER INLET SCREEN / MAINTENANCE
The water inlet filter must be inspected regularly, so as to avoid blockage and
restriction in the water supply to the pump (fig 3).
For safety reasons clean the machine every 3 months. Before working with the
machine, check the water inlet filter and the nozzle for blockage or dirt (fig. 3).
After working with the machine make sure no water remains in the pump or
hose.
HOSE REEL
Unroll the hose entirely before use. After use roll up again. To block the handle,
pull out and fold in two (fig. 4).