95
CHARGING THE VEHICLE
2.
Select Park [P] from the drive selection
button, then press the Start/Stop
button to take the vehicle out of Drive
mode.
The READY indicator on the DIS will
turn off and the doors will unlock to
indicate the vehicle is ready for
charging.
Note:
If the cord is connected, the
vehicle will automatically switch to Park
[P].
3.
Open the charging port cover.
4.
Locate a wall outlet (Standard US 120V,
16A).
5.
Insert charger plug into wall outlet.
6.
Insert charge coupler into the charge
port.
7.
While the vehicle is charging, the
charging indicator light on the DIS
will illuminate and the battery
charge level indicator will begin to
rise.
Note:
During charging or in high
ambient temperatures, the cooling fans
and coolant pumps may automatically
switch on for a period of time to cool the
cells in the battery. The fans and pumps
may be audible when in operation. This
is normal and not a cause for concern.
Accessory mode
Drive mode
8.
When the vehicle is fully charged, the
DIS will be solid green with a percent of
charge displayed.
9.
Press the button on the charging
connector to release the locking clip,
then remove the connector from the
charging port.
Summary of Contents for REVERO 2017
