17
1.
Press and hold the release button and pull out to remove the controller. (See
Fig.5.4.21.)
2.
Loose the screws on the controller fixing tube to adjust the height and then retighten
the screws. (See Fig.5.4.22.)
3.
Press and hold the release button to put the controller to its original position.
Figure.5.4.20
Figure.5.4.21
Figure.5.4.22
5.4.15 Foot Support Fore and Aft Adjustment
There are 3 positions with 2 cm increment for fore and aft adjustment. Unscrew the screw on
the seat frame and according to the occupant’s desire to adjust the foot support fore and aft
and then align the hole to retighten. (See Fig.5.4.23)
Figure.5.4.23
Figure.5.4.24
Figure.5.4.25
5.4.16 Foot Support Height Adjustment
There are 3 positions with 2.2 cm increment for height adjustment. Unscrew the screw on the
adjustable foot support frame and adjust the foot support height and then align the hole to
retighten. (See Fig.5.4.24)
5.4.17 Attaching the Anti-tipper
Pressing the rear button let the release button go into the inside of tube and then insert the
anti-tipper into the frame rear tube and release the button to lock. (Make sure that the release
button goes into the hole. See Fig.5.4.25.)
5.5 KP-12, KP-12T Disassembly and Assembly
Summary of Contents for KP12 Series
Page 1: ...Powered Wheelchair Owner s Manual KP12 Series KP 12 KP 12T...
Page 2: ......
Page 13: ...5...
Page 39: ......