Karma KP12 Series, Owner'S Manual

Page: 23 / 40

15
Figure.5.4.8 Figure.5.4.9 Figure.5.4.10
5.4.8 Height Adjustment for Back Support
1. Remove the cover of the back support. (See Fig.5.4.9.)
2. Unscrew the 8 screws at the upper and lower parts on both side of back side of back
support and according to the occupant’s desire adjust the back support height and
then retighten the screws (See Fig.5.4.12.) You can also unscrew the hanging bracket
of back support and adjust the back support height, and then retighten the screws.
(See Fig.5.4.13.) Do not lose the liner, otherwise the hanging bracket of back support
cannot be retighten.
Figure.5.4.11 Figure.5.4.12 Figure5.4.13
5.4.9 Adjustment for Back Support Hanger and Hanging Bracket
If the hanger cannot be inserted to hanging bracket, or that the back support interfere with the
seat resulting from the adjustment of back support and seat, you can adjust hanger as shown
in Fig.5.4.12, and hanging bracket as shown in Fig.5.4.13.
Do make both fit each other and then retighten the screws. (Do not lose the liner, otherwise
the hanging bracket of back support cannot be retighten.)
5.4.10 Adjustment for Head Support
Height Adjustment: Unscrew the knob bolts and adjust the head support height and then
retighten the knob bolt. (See Fig.5.4.14)
Fore and Aft Adjustment: Unscrew the knob bolts and adjust the head support fore and aft and
then retighten the screw. (See Fig.5.4.15)