22
5.1.3.1.1 While the control system is switched on, depress and hold the
on/off button.
5.1.3.1.2 *After 1 second the control system will beep. Now release the on/off
button.
5.1.3.1.3 Deflect the joystick forwards until the control system beeps.
5.1.3.1.4 Deflect the joystick in reverse until the control system beeps.
5.1.3.1.5 Release the joystick, there will be a long beep.
5.1.3.1.6 The wheelchair is now locked.
5.1.3.2 To unlock the wheelchair
5.1.3.2.1 Use the on/off button to switch the control system on. The
maximum speed / profile indicator will be rippling up and down.
5.1.3.2.2 Deflect the joystick forwards until the control system beeps.
5.1.3.2.3 Deflect the joystick in reverse until the control system beeps.
5.1.3.2.4 Release the joystick, there will be a long beep.
5.1.3.2.5 The wheelchair is now unlocked.
5.2 Controller Cable Fastening Position
5.2.1 The controller for KP-10.3 Series is packaged in the carton; after opening
the carton, the controller needs to be put into the position with fastening
the cable tie.
5.2.2 Please follow the following steps
5.2.2.1 Fasten the controller on the fixing bar.(Figure 5-1, Figure 5-2
)
5.2.2.2 Untighten screw B slightly. Adjust the location of the controller to fit
the user's need. Retighten screw B
(Figure 5-1)
(Figure 5-2)
(Figure 5-3)
CAUTION:
●
Please make sure the the cable is appropriate routed so that adjusting
the location of the controll or flipping back the armrest could not
damage the cable or cause malfunctions of the wheelchair.
Summary of Contents for KP-10.3
Page 17: ...7...
Page 18: ...8...
Page 19: ...9...
Page 30: ...20 14 Anti Tipper 15 Battery Casing 16 Clutch...
