Karma KP-10.3, Owner'S Manual, Page: 50 / 64

40
7.4.2 Do not use water, oil or other chemical solutions to clean your wheelchair.
Be sure NOT to spray the vehicle with water, as not to damage the
electronic components and PCB circuit board.
7.4.3 Please clean the vehicle by wiping it with either a dry or moist cloth.
7.4.4 Please take the vehicle to an authorized KARMA wheelchair dealer for
repairs and adjustments. Improper adjustments could lead to wheelchair
malfunction or an accident.
CAUTION
●Before performing any maintenance, be sure to turn the power OFF and
unplug the charger if connected.
●DO NOT over-tighten any hardware. This could cause damage to the frame
and hardware.
SUGGESTION
●Do not directly spray water on your wheelchair to wash it, as this could lead
to a malfunction in the electric system.
●Do not use gasoline, solvents or other abrasive solutions; the casing may
become deformed or damaged.
WARNING
●After ANY adjustments, repair or service and BEFORE use, make sure that
all hardware is tightened securely, otherwise injury or damage may occur.
7.5 Suggested Maintenance Procedures
7.5.1 Before using the powered wheelchair, make sure all nuts and bolts are
tight.
7.5.2 Check all parts for damage or wear and have a qualified technician replace
it if necessary.
7.5.3 Check all parts for proper adjustment.
7.5.4 Ensure that the batteries are properly maintained and charged as
required.
7.5.5 Inspect brake for proper operation.
7.5.6 The wheels and tires should be checked periodically for cracks and wear,
and should be replaced by a qualified technician.
7.5.7 Regularly check for loose nuts and/or bolts in the front and rear wheels. If