Karma EvO Lectus, User Manual

Page: 68 / 115

68
\
12.6 R-net Connectors
To connect the Communication Cables:
• Holding the connector housing, firmly push the connector into its mate until
you can no longer see the yellow plastic.
The connectors are secured using a friction system.
To disconnect the Communication Cables:
• Holding the connector housing firmly, pull the connectors apart.
Do not hold or pull on the cable. Always grip the connector when connecting
and disconnecting.
When the control system is first switched on after a connection, or system
component change the Timer will be displayed whilst the system checks itself
and then the re-start icon will be displayed. Switch the control system off and
on again to operate.
The Joystick Module is supplied with rubber bungs that must be inserted
into the Jack Socket when no external device is connected.
If the communication is poor because of damaged cables, a trip code "bad
cable" might be show on the display. Should this message appear on the
display contact your local supplier to have the wheelchair checked.