45
11.2.9 legrest angle
the legrest angle can be mechanically set following the next steps:
step 1: loosen up the bolt (F) on the telescopic tube of the legrest using a
5mm Allan key. Just open it far enough so you feel it is starting to move.
step 2: move the legrest into the required angle.
step 3: tighten the bolt so the setting is fixed.
The legrest angle can optionally be power adjusted. How to control the
powered legrest is explained in chapter 16.
by loosening the bolt of the telescopic tube, the legrest might suddenly
start to move down. If the user has his or her feet on the legrest, this
sudden movement might cause an shock reaction.
It is best to hold the legrest with one hand and loosen the bolt with the
other hand.
F
Summary of Contents for EvO Lectus
