manualshive.com logo in svg

Karma EvO Lectus, User Manual

Share
Download
Karma EvO Lectus User Manual Download Page 65

65 

 

12.4 buttons 

 

The joystick module has several button which will be explained below. 
 

 

 

12.4.1 on/off button 

 

The On/Off button applies power to the control system electronics, which in 
turn supply power to the wheelchair’s motors. Do not use the On/Off button to 
stop the wheelchair unless there is an emergency. (If you do, you may shorten 
the life of the wheelchair drive components). 

 

 

 

12.4.2 horn button 

 

The horn will sound while this button is depressed. 
 

12.4.3 speed decrease button 

 

This button decreases the speed setting. 
 

12.4.4 speed increase button 

 

This button increases the speed setting. (it does not increase the maximum 
speed!). 

Always make sure the wheelchair is switched off before entering or leaving 
the wheelchair. If the wheelchair is switched on during transferring, there is 
a danger the joystick will be touched and the wheelchair will move.  

Summary of Contents for EvO Lectus




















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands