Karma EvO Lectus, User Manual

Page: 48 / 115

48
step 1: loosen up the four bolts of the calf support pad, using a 5mm Allan
Key.
step 2: slide the pad into the right position on the rail.
step 3: tighten the four bolt. Repeat the same for the other calf support pad.
11.2.11.3 adjusting the depth and angle of the calf support pads.
step 1: remove the two covers on each side of the calf support.
step 2: loosen up the bolts of the friction setting, using a 6mm Allan key.
step 3: now push the calf support pad in the right depth and angle setting.
step 4: tighten the bolts again to fixate the position.
step 5: place the covers back onto the friction end caps.