Karl Storz 20 7010 20-1, Service Manual

Page: 154 / 170

3-6
05.13 / V1.0
UNIDRIVE
®
S III
3.4.2. Error message description
Error code Error message Description
1 E01 Memory error
2 E02 Motor board defective
3 E03 Hardware configuration error
4 E04 Software configuration error
5 E05 ---
6 E06 ---
7 E07 ---
8 E08 ---
9 E09 Motor M1 defective
10 E10 Motor M2 defective
11 E11 No footswitch
12 E12 No motor
13 E13 Motor M1 overheated
14 E14 ---
15 E15 Motor M2 overheated
16 E16 Irrigation pump not closed
17 E17 Motor M1 not supported
18 E18 Motor M2 not supported
19 E19 Motor M1 stopped (blocked)
20 E20 Motor M2 stopped (blocked)
21 E21 No SCB
3
WARNING: Always unplug the equipment before performing any repairs.
3
WARNING: All devices must be disinfected prior to repair.
2
CAUTION: Repairs may only be performed by qualified technicians trained in electrical or
electronic engineering, in compliance with the relevant occupational, safety and accident
prevention regulations.
Safety Testing based on IEC EN 62353, IEC / UL 60601-1, whichever may apply, must be
performed after servicing has been completed.