For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST)
Page 6
Install Instructions
–
4064P
Step 3
–
Install Floor Supports
•
Place bottom supports (E, F & G) under bottom wing (B).
•
Align outside supports (E & F) with previously removed D-Rings. Bolt using ONLY the
previously removed D-Rings.
•
Bolt through the center slot of the
bottom wing (B) and the middle
support (G) into the center plus nut
that was previously installed using
1/4" x 1" hex head bolts (4), 1/4"
lock washers (5) and 1/4" flat
washers (6).
•
Bolt middle support to bottom wing
out on the edge of platform using
two 1/4" x 3/4" carriage bolts (3)
and two 1/4" flanged nylocs (2).
*At this time, only attach the middle
support to the bottom wing*
•
Snug Tighten, but allow movement
