For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST)
Page 5
Install Instructions
–
4064P
Step 2
–
Install Floor Mount
•
Remove D-Rings below seats.
•
Use bottom wing (B) as a
template. Hold bottom wing
inside of van below the seats.
•
Align the outside holes on the
bottom wing with the previously
removed D-Ring holes. Press
against pedestal.
•
Mark through the 3 middle slots
of the bottom wing onto the van.
•
Remove bottom wing.
•
Use 25/64” d
rill to drill marked
locations.
•
Install three plusnuts in
previously drilled holes.
•
Bolt bottom wing (B) to the 2 outside plus nuts (7) previously installed using 1/4" x 1" hex
head bolts (4), 1/4" lock washers (5) and 1/4" flat washers (6).
•
Snug Tighten, but allow movement
