For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST)
Page 8
Install Instructions
–
4064P
Step 5
–
Install Partition
•
Insert partition (40651 or 40652)
assembly into van. Be sure to have the
flanges to the rear of the van.
•
Bolt all around edges of partition to top
and side panels using 1/4" flanged hex
head bolts and 1/4" flanged nyloc nuts.
•
Along the bottom of the partition, be
sure to bolt through the supports
installed in step 3.
•
If using the pass through door, DO NOT
bolt through middle panel of the
partition.
•
Snug Tighten, but allow movement.
Square and align partition to your liking.
Tighten all bolts from previous steps.
Your installation is now complete.
