Karel MS224 Installation & Maintenance Guide
Edition 3.2
59
After the cabling of the PC interface is completed, the necessary CM224 and /
or PK224 software must be installed on the PC, as described in the CM224 and
PK224 Owner’s Guides, respectively.
It is also necessary to enter the related programming code for selecting the PC
as the CRL (Call Record Listing) media, as explained in the MS224
Programming Guide.
III.2.B. SERIAL PRINTER INTERFACE
•
C
ABLING
:
1) The 4-pin RJ plug at one end of the Printer-Exchange cable (which is to be
procured locally) should be connected to the PC CM socket on the MS224
CPUKON card.
2) The 25-pin or 9-pin D-type plug at the other end of the cable should be
attached to the serial port of the printer.
The following figure illustrates the cabling :
Figure B-13
Summary of Contents for MS224
