Karel MS224, Installation & Maintenance Manual

Page: 25 / 81

Karel MS224 Installation & Maintenance Guide
Edition 3.2
22
II.1. CONSOLES, FEATURE PHONES, DIRECT STATION
SELECT MODULES - OP48(-H), LT48(-H), DSS80,
DSS40
OP48(-H) Consoles, LT48(-H) Feature Phones, DSS80 / DSS40 Direct Station
Select Modules are the members of the same telephone family, hence they have
similar cases.
The data cabling of these sets is made via the 6-pin RJ socket (named CONSOLE)
on the MS224 CPUKON card. The signaling between the system and consoles,
feature phones or DSS modules is illustrated in the following table :
MS224 CPUKON Card Telephone / DSS Card
CONSOLE Socket Pin No Signal RJ Plug Pin No
1 +12 VDC 6
2 Busy -
3 A (ext.11) 3 (ext.11)
4 B (ext.11) 4 (ext.11)
5 GND 2
6 Data 1
The input of +12 VDC is regulated to +5 VDC by telephone / DSS cards.
II.1.A. OP48(-H) CONSOLE
There are two types of OP48 Consoles, OP48 Console and OP48-H Handsfree
Console, the second one being half-duplex. The OP48(-H) Console has a BDP
(Busy Display Panel) that shows the states of the first 40 extensions and the first
12 lines as well as some system features. There is also an 8-Character Display that
keeps the user informed about the calling/called extensions and dialed numbers as
well as some system features.
The outlook and BDP of OP48-H Console are illustrated in the following figures :