Call Control Key
This key is designed for users who have high intense call traffic, to park and hold calls by
pressing a single key only. Any line (internal or external) which is not assigned to any key
of DSS module, will be assigned to the first empty call use key. User can easily park and
retrieve this call easily by pressing that key.
First of all, number of Call Control Keys -between 1 and 6- should be decided. (If the ‘0’ is
selected, the Call Control keys defined before will be canceled.) After that, DSS number of
the keys should be defined. (For example; when there are more than one DSS modules, if
the keys wanted to be programmed as ‘Call Control Key’ are on the second DSS module,
‘2’ must be written to ‘DSS Number:’ field.) After the process is confirmed, desired number
of call use keys will be assigned to the related DSS module by starting from the last key of
DSS module. (The last key on the related DSS module will be the first Call Control Key.)
Thanks to this, six different calls can be controlled at the same time. Calls will be assigned
to the call control keys in sequence (starting from the first one).
If there are no call assignment to those keys, there should appear ‘ - ‘ at near of the related
key on the DSS3L-24 module. However if there is an assignment, there should appear the
related number at near of the key. The status of a call can be viewed by the LED on the
key and also can be viewed on LCD screen of DSS3L-24 module. LCD Messages and
their meanings are shown below:
Status
LED
LCD
Incoming Call
Blinking with a Special Cadence
“Line / Extension number
“
Busy
Continuously On
“Line / Extension number”
Parked
Blinking Fast
“Line / Extension number
P
”
Phonebook
Any of the numbers in the phonebook can be assigned to any of the programmable keys.
Feature
It enables user to use provided features by a single key.
Provided features are listed below:
• Call Diversion
• Change tag
• Do not disturb
• Night mode
• Call pick up
• Call back
• Phone lock
