Kärcher VC 4i Cordless Plus, Manual

Page: 22 / 76

22 English
 Attach the dusting brush.
For cleaning wall surfaces, curtains,
gaps in furniture, etc.
You can use the flexible hose to extend
the length.
Illustration J
 Attach the crevice nozzle.
Illustration H
1
For cleaning joints, grooves between
doors and windows, tiny slits, etc.
2
For cleaning delicate objects with care,
e.g. bookcases, handicrafts, etc.
 Attach the upholster brush.
For cleaning upholstered furniture, mat-
tresses, laced curtains, etc.
 Attach the mattress nozzle.
For cleaning mites / dust in the mattress-
es and pillows, etc.
Storage
Note
 Store the appliance in a dry room.
 Consider the weight of the appliance
when storing it.
1. Insert the storage holder into the storage
base.
Illustration K
1
Storage holder
2
Storage base
2. Insert the appliance into the storage
dock.
Illustration L
3. Put the crevice nozzle and the upholster
brush into accessory storage.
Care and maintenance
Note
 Use the appliance only when all filters
and the dust container are installed.
 Defective filters and filters that can no
longer be cleaned must be replaced.
Before doing any work on the appliance:
1. Switch off the appliance.
2. Unplug the power supply from the power
outlet.
Cleaning the HEPA 12 filter /
cyclone cover and emptying the
dust container
Note
 If the HEPA 12 filter cannot be cleaned,
it must be replaced.
 Do not dry the HEPA 12 filter and the cy-
clone cover using a hair dryer.
1. Unlock the dust container, and pull out
the dust container.
Illustration M
2. Unplug the HEPA 12 filter and the cy-
clone cover from the dust container.
Illustration N
3. Empty the dust container, and rub down
inside it using a cloth.
Illustration O
4. Turn the cyclone cover clockwise, and
separate the HEPA 12 filter from the cy-
clone cover.
Illustration P
5. Clean the HEPA 12 filter and cyclone
cover under running water.
Illustration Q
6. Allow the HEPA 12 filter and cyclone
cover to dry completely.
Cleaning / replacing the brush roller
Note
 Replace the brush roller when it is dam-
aged.

Only dry brush roller is allowed for re-
placement.
 Do not dry the brush roller using a hair
dryer.
1. Press the release button, and pull out
the roller lever and brush roller.
Illustration R
2. Remove the roller lever from the brush
roller.
Illustration S
1
Brush roller
2
Roller lever
3. Rinse the brush roller with freshwater.
Illustration T
4. Shake the brush roller after washing to
remove excess dirt or water.
5. Ensure the brush roller dry completely.
Illustration T