background image

5

Safety

Important Trailer Safety Information
Referencing the Utility Trailer in this 
Manual

All references to the trailer or component parts to either 
left or right are made with the assumption that you are 
standing behind the trailer facing forward. Your left 
hand or right hand is the equivalent on the trailer.

Tire Safety

The most common cause of trailer tire failure is under-
inflation. Therefore, it is important that you always 
maintain the specified air pressure as indicated by the 
tire manufacturer on the tire's side-walls. This 
information can also be found on the tire label or the air 
pressure molded on the tire side-wall.

The most important things you can do to maintaining 
proper tire pressure are observe all tire and trailer 
maximum carrying capacities, avoid road hazards, and 
inspect the tires for cuts, slashes and other 
irregularities. These practices, along with other care 
and maintenance, can improve handling, help protect 
you and others from avoidable breakdowns and 
accidents, improve fuel economy, and increase the life 
of your tires.

Make tire safety a regular part of your trailer 
maintenance routine. The time you spend is minimal 
compared to the amount of time, inconvenience, and 
potential safety hazards that can occur from a flat tire 
or failure.

Basic Tire Maintenance

Properly maintained tires improve the load-carrying 
capability of your trailer. You can help avoid flat tires 
and tire failures by maintaining proper tire pressure, 
observing tire and trailer capacity limits, avoiding road 
hazards, and inspecting your tires regularly.

Identifying Your Recommended Tire 
Pressure and Maximum Load Carrying 
Capacity for Your Trailer

Both the tire placard and the VIN label are permanently 
attached on top of the frame of your trailer and have 
the required information printed on them. They also list 
the maximum load that can be placed on the trailer 
without exceeding the load limits of the tires or the 
trailers other components. These labels indicate the 
manufacturer’s information including:

Recommended tire size.

Recommended tire inflation pressure.

The maximum weight the trailer is designed to 
carry.

Gross vehicle weight rating of the trailer.

Gross axle weight rating of the trailer.

Understanding Tire Pressure and Load 
Limits

Tire inflation pressure is the level of air in the tire that 
provides it with the load-carrying capacity and affects 
the overall performance of the trailer. The tire inflation 
pressure is a number that indicates the amount of air 
pressure that is inside the tire. It is measured in pounds 
per square inch (PSI). The tire must be inflated to the 
air pressure as designated on the labels. Also listed on 
the labels is the air pressure in kilo Pascals (kPa), 
which is a metric measurement. Tire manufacturers 
determine the air pressure to maximize the amount of 
weight the tires can safely carry. The proper tire 
pressure for your trailer tires is referred to as the 
“recommended cold inflation pressure.” It is difficult to 
obtain the recommended tire pressure if your tires are 
not cold when the reading is taken because the air will 
expand when it is warmed by towing down the road, 
thus increasing the air pressure inside. If air is added to 
a tire that is low the air pressure should never exceed 
the recommended pressure.
It is important to check your trailer’s tire pressure at 
least once a month for the following reasons:
Most tires will naturally lose air over time.
Tires can lose air suddenly if driven over an object that 
punctures or cuts the tire. Sometimes a sharp blow 
from a pothole or curb can knock the tire loose from the 
rim causing immediate deflation.

Maintaining Proper Tire Pressure

Locate the recommended tire pressure on the trailer's 
tire information placard or owner's manual.
Record the tire pressure of all tires. If the tire pressure 
is too high in any of the tires, slowly release air by 
gently pressing on the tire valve stem with the edge of 
your tire gauge until you get the correct pressure.
If the tire pressure is too low, note the difference 
between the measured tire pressure and the correct tire 
pressure. These “missing” pounds of pressure are what 
you will need to add.
Add the missing pounds of air pressure to each tire that 
is under inflated.

Check all tires to make sure they have the same air 
pressure.

Karcher Trailer 3500E HDS 4.7/35 Operator’s Manual  9.808-363.0 - B

Summary of Contents for TRAILER 3500E HDS 4.7/35



























Reviews: