background image

11

Safety

WARNING: High pressure spray 
can cause paint chips or other 
particles to become airborne 
and fly at high speeds. To avoid 
personal injury, eye, hand and 
foot safety devices must be 
worn.

AVERTISSEMENT: Un jet haute 
pression peut écailler la 
peinture ou provoquer l'émis-
sion d'autres particules dans 

l'air et leur projection à hautes vitesses. Pour éviter 
les blessures corporelles, il faut porter des disposi-
tifs de sécurité pour les yeux, les mains et les 
pieds.

10. Always wear properly rated eye protection such as 

safety goggles or face shield while spraying.  
Safety glasses do not provide full protection.

WARNING: This machine 
exceeds 85 dB. Appropriate ear 
protection must be worn.

AVERTISSEMENT: Cette 
machine excède 85 dB et une 
protection de l'ouïe appropriée 
doit être portée.

WARNING: Hot discharge fluid. 
Do not touch or direct 
discharge stream at persons.

AVERTISSEMENT: Liquide de 
décharge chaud. Ne pas diriger 
le débit de décharge vers des 
personnes.

WARNING: This machine 
produces hot water and must 
have insulated components 

attached to protect the operator.

AVERTISSEMENT: Cette machine produit de l'eau 
chaude et doit comporter des composants isolés 
attachés pour protégerl'opérateur

.

WARNING: Risk of injury. Hot 
surfaces can cause burns. Use 
only designated gripping areas 
of spray gun and wand. Do not 
place hands or feet on non-
insulated areas of the pressure 
washer.

AVERTISSEMENT: Les surfaces 
chaudes peuvent causer des 
brûlures. Utiliser uniquement 
les  zones de prise désignées 

du pistolet pulvérisateur et de la lance. Ne pas 
placer les mains ou les pieds sur des endroits non 
isolés de la laveuse à pression.

WARNING

    USE PROTECTIVE 

  EYE WEAR 

AND CLOTHING

WHEN OPERATING

 THIS EQUIPMENT.

WARNING

EAR PROCTION

MUST BE WORN

WARNING

HOT DISCHARGE FLUID:

DO NOT TOUCH OR

DIRECT DISCHARGE

STEAM AT PERSONS.

WARNING

RISK OF INJURY. 

HOT SURFACES 

CAN CAUSE BURNS

Karcher Trailer 3500E HDS 4.7/35 Operator’s Manual  9.808-363.0 - B

Summary of Contents for TRAILER 3500E HDS 4.7/35



























Reviews: