background image

12

Safety

11. To reduce the risk of injury, close supervision is 

necessary when a machine is used near children. 
Do not allow children to operate the pressure 
washer. 

This machine must be attended during 

operation.

WARNING: Grip cleaning wand 
securely with both hands 
before starting. Failure to do 
this could result in injury from a 
whipping wand.

AVERTISSEMENT: Agripper la 
lance de nettoyage avec les 
deux mains avant de 
commencer. Le non-respect de 
cette consigne pourrait mener à 
des blessures causées par le 

mouvement violent de la lance.

12. Never make adjustments on machine while in 

operation.

13. Be certain all quick coupler fittings are secured 

before using pressure washer.

WARNING: High pressure 
developed by these machines 
will cause personal injury or 
equipment damage. Keep clear 
of nozzle. Use caution when 
operating. Do not direct 
discharge stream at people, or 
severe injury or death will 
result. 

AVERTISSEMENT: La haute 
pression générée par ces 

machines causera des lésions corporelles ou des 
dommages à l'équipement. Se tenir à l'écart de la 
buse. Ne pas décharger directement le jet vers des 
personnes ou des animaux, car cela risquerait de 
causer des blessures graves ou même la mort.

WARNING: Protect machine 
from freezing.

AVERTISSEMENT: Protéger la 
machine contre le gel.

14.To keep machine in best 
operating conditions, it is 
important you protect machine 
from freezing. Failure to protect 
machine from freezing could 
cause malfunction of the machine 

and result in death, serious bodily injury, and/or 

property damage. Follow storage instructions 
specified in this manual.

15. Inlet water must be clean fresh water and no hotter 

then 90°F.

WARNING: Risk of 
asphyxiation. Use this product 
only in a well ventilated area. 

AVERTISSEMENT: Risque 
d'asphyxie : Utiliser ce produit 
uniquement dans un endroit 
bien ventilé. 

16.Avoid operating machines in 
small areas or near exhaust fans. 
Adequate oxygen is needed for 

combustion or dangerous carbon monoxide will 
result.

17. Manufacturer will not be liable for any changes 

made to our standard machines or any compo-
nents not purchased from us.

18. The best insurance against an accident is precau-

tion and knowledge of the machine.

WARNING: Be extremely 
careful when using a ladder, 
scaffolding or any other 
relatively unstable location. The 
cleaning area should have 
adequate slopes and drainage 
to reduce the possibility of a 
fall due to slippery surfaces.

AVERTISSEMENT: Faire preuve 
d'une extrême prudence au 
moment d'utiliser une échelle, 

des échafaudages ou toute autre surface relative-
ment instable. La zone de nettoyage doit avoir une 
pente et un drainage adéquats pour réduire la 
possibilité d'une chute due à une surface glissante.

WARNING

TRIGGER GUN KICKS 

 BACK —  HOLD WITH 

        BOTH HANDS

WARNING

RISK OF INJECTION 

OR SEVERE INJURY

TO PERSONS. KEEP 

CLEAR OF NOZZLE.

WARNING

PROCTECT FROM

FREEZING

WARNING

RISK OF 

ASPHYXIATION. 

USE THIS PRODUCT 

ONLY IN A WELL 

VENTILATED AREA.

WARNING

RISK OF INJURY

FROM FALLS WHEN

USING LADDER.

Karcher Trailer 3500E HDS 4.7/35 Operator’s Manual  9.808-363.0 - B

Summary of Contents for TRAILER 3500E HDS 4.7/35



























Reviews: